Jan-Philipp Weiss | March 6, 2014

Previously in this blog series, my colleague Pär described parallel numerical simulations with COMSOL Multiphysics on shared and distributed memory platforms. Today, we discuss the combination of these two methods: hybrid computing. I will try to shed some light onto the various aspects of hybrid computing and modeling, and show how COMSOL Multiphysics can use hybrid configurations in order to squeeze out the best performance on parallel platforms.

Read more ⇢

Article Categories

Marc Fernandez Silva | March 5, 2014

Being able to compute the spatial gradients of the magnetic field or magnetic flux density is needed in areas such as radiology, magnetophoresis, and geophysics. One of the most important applications is in the design of magnetic resonance imaging machines, where it’s important to analyze not only the field strength, but also the spatial variation of the field. Today’s blog will demonstrate how to compute and plot the gradients of the magnetic field in 3D electromagnetic simulations in COMSOL Multiphysics.

Read more ⇢

Article Categories

Gerard Hegemans | March 4, 2014

Cars come with either an automatic gearbox or a manually operated one, a stick shift. With a manual gearbox, we use the stick shifter very frequently while driving the car, yet we hardly ever think about the way the mechanism works. Here, we investigate how it works and what forces are acting on it when submitted to a very common load case — selecting first gear — with the help of a COMSOL Multibody Dynamics model of the gearshift mechanism.

Read more ⇢
Mark Fowler | March 3, 2014

Polymer electrolyte membrane or proton exchange membrane (PEM) fuel cells provide a potentially clean and portable source of power. This is of major interest to the transport industry as well as for power generation at fixed sites. COMSOL Multiphysics is a powerful simulation tool you can use to help understand and overcome PEM fuel cell design and construction challenges.

Read more ⇢

Article Categories

Mads Herring Jensen | February 28, 2014

Previously, we introduced the theory behind thermoacoustics. Here, I will go deeper into modeling acoustics with the Thermoacoustic interface in COMSOL Multiphysics and show you some tips and tricks on how to do this.

Read more ⇢
Mads Herring Jensen | February 27, 2014

When sound propagates in structures and geometries with small dimensions, the sound waves become attenuated because of thermal and viscous losses. More specifically, the losses occur in the acoustic thermal and viscous boundary layers near the walls. This is a known phenomenon that needs to be included when studying and simulating systems affected by these losses in order to model these systems correctly and to match measurements.

Read more ⇢

Article Categories

Ahsan Munir | February 26, 2014

DNA is a complex molecule that contains instructions for life and often referred to as a “digital fingerprint” or code telling a cell what to do. DNA is often the only means for accurate testing and identification of biomolecules, cells, or even an entire person during forensic investigations. The need to be able to test for DNA, as quickly as possible, and even at the site where the sample is taken, is becoming more and more important.

Read more ⇢
Andrew Griesmer | February 25, 2014

A circulating fluidized bed (CFB) is used to create a homogeneous mixture of gas (usually air) and solid particles to increase the efficiency of the combustion process in boilers. A better understanding of this process will help engineers to optimize their design parameters based on their individual needs. The Circulating Fluidized Bed model in COMSOL does just this, simulating a CFB with a given set of parameters that are easily interchangeable, depending on the needs of the user.

Read more ⇢

Article Categories

Mark Fowler | February 24, 2014

Submarines can be detected by enemy weapon systems due to their magnetic signatures. By designing vessels with reduced magnetic signatures, detection can be avoided, but the composition and size of most submarines often make simulation difficult. COMSOL software helps you overcome this problem.

Read more ⇢

Article Categories

Phil Kinnane | February 21, 2014

It must be an impressive sight. For people driving through the Mojave Desert from Los Angeles to Las Vegas, the world’s largest solar-based thermal power plant can be seen on the way. The Ivanpah Solar Electric Generation System consists of almost 350,000 garage door-sized mirrors, all pointing the sun’s rays to large boilers at the top of three 33-story tall towers. The result is a 390 MW power station — about a fifth the generation capacity of the Hoover Dam.

Read more ⇢

Article Categories

Pär Persson Mattsson | February 20, 2014

In the latest post in this Hybrid Modeling blog series, we discussed the basic principles behind shared memory computing — what it is, why we use it, and how the COMSOL software uses it in its computations. Today, we are going to discuss the other building block of hybrid parallel computing: distributed memory computing.

Read more ⇢

Article Categories

1 10 11 12 13 14 65