Galeria de Modelos

The Model Gallery features COMSOL Multiphysics model files from a wide variety of application areas including the electrical, mechanical, fluid, and chemical disciplines. You can download ready-to-use models and step-by-step instructions for building the model, and use these as a starting point for your own modeling work. Use the Quick Search to find models relevant to your area of expertise, and login or create a COMSOL Access account that is associated with a valid COMSOL license to download the model files.

Quadrupole Mass Filter

A quadrupole mass filter (QMF) is a key component of a modern mass spectrometer. A QMF uses direct current (DC) and alternating current (AC) electric fields to analyze positive or negative ions by mass to charge ratio. A QMF consists of 4 parallel rods spaced equidistantly, the ratio of the rod radius to the radius of the inscribed circle is 1.148. Opposite pairs of rods are electrically ...

Static Field Modeling of a Halbach Rotor

This model presents the static field modeling of an outward flux focusing magnetic rotor using permanent magnets. This magnetic rotor is also often called a Halbach rotor. The use of permanent magnets in rotatory devices such as motors, generators and magnetic gears is increasing. The accurate modeling of a permanent magnets fields is important. This model illustrates how to calculate the ...

Ion Funnel

An electrodynamic ion funnel provides an efficient means of transferring ions from regions of high pressure to high vacuum. The ion funnel can couple devices which generally operate at pressures of different orders of magnitude, such as ion mobility spectrometers and mass spectrometers, allowing mixtures of ionized gases to be separated and analyzed while minimizing losses. This model ...

Inductance and Resistance

This is a model of a simple AC coil: a single-turn thick circular copper wire. A parametric study of current distribution, coil inductance and coil resistance is performed for different frequencies. The skin effect becomes increasingly important at the higher frequencies.

RF-Heated Hot Wall Furnace for Semiconductor Processing

Furnace reactors are used in the fabrication of semiconductors to grow layers on wafers. These can also be used for epitaxial growth, which is a key technology for fabrication of electrical devices. A silicon carbide growth takes place in graphite susceptors at very high temperatures (~2000 oC), which are heated with RF coils. The design of the chamber is crucial to reach a uniform ...

Benchmark Electromagnetic Simulation of a Coil Using Infinite Elements

Many environments where electromagnetic phenomena are modeled are unbounded or open, meaning that the fields should extend towards infinity. The easiest approach to model such is to use infinite elements. COMSOL Multiphysics' implementation of these maps the model coordinates from the local, finite-sized domain to a stretched domain. The inner boundary of this stretched domain coincides with ...

Electric Shielding Comparison

The electric shielding boundary condition is meant to approximate a thin layer of highly conductive material that provides an additional current path tangential to a boundary. This example compares the electric shielding boundary condition to a full-fidelity model and discusses the range of applicability of this boundary condition.

Geoelectrics - Forward Problem and Sensitivity

The classical forward problem of geoelectrics (includes electrical resistivity tomography, ERT and earlier techniques as vertical electric sounding, VES) is the calculation of potentials at a given set of electrodes (M,N) while current is injected at other electrodes (A,B) into the ground. Typically the physical domain (earth) is unbounded to the sides and the bottom because of which one needs ...


Magnetotellurics is a method for estimating the resistivity profile of the Earth's subsurface using the natural electromagnetic source provided by the ionosphere. This model was defined by Zhdanov et al. in a study published in 1997. In this article, various scientific groups compared software performance on the same models. This is the model called COMMEMI-3D-2, which has become one of the ...

Thin Low Permittivity Gap Comparison

The thin low permittivity gap boundary condition is meant to approximate a thin layer of material with low relative permittivity compared to its surroundings. This boundary condition is available for electrostatic field modeling. This example compares the thin low permittivity gap boundary condition to a full-fidelity model and discusses the range of applicability of this boundary condition.

Quick Search

61 - 70 of 70 First | < Previous | Next > | Last