Galeria de Modelos

The Model Gallery features COMSOL Multiphysics model files from a wide variety of application areas including the electrical, mechanical, fluid, and chemical disciplines. You can download ready-to-use models and step-by-step instructions for building the model, and use these as a starting point for your own modeling work. Use the Quick Search to find models relevant to your area of expertise, and login or create a COMSOL Access account that is associated with a valid COMSOL license to download the model files.

Loudspeaker Driver in a Vented Enclosure

This example models the acoustic behavior of a woofer mounted in a bass reflex enclosure and placed in the corner of a room. One of the most important design parameters for a loudspeaker driver is its sensitivity as a function of the frequency. To isolate the driver’s performance from that of the environment it usually operates in, the driver is often set in an infinite baffle. This model, ...

Radially Polarized Spherical Piezoelectric Acoustic Transducer

This tutorial provides a step-by-step instruction to setup a fully-coupled 3D structural-acoustic interaction problem. Interaction between a vibrating spherical piezoelectric structure with the surrounding fluid media is considered. The piezoelectric material PZT-5H from the materials library is used. Instructions on how to create a radially polarized piezoelectric material in spherical ...

Point Source in 2D Jet: Radiation and refraction of sound waves through a 2D shear layer

This is a benchmark model for the linearized Euler interface of the Acoustics Module. The model is from the NASA "Fourth Computational Aeroacoustics (CAA) Workshop on Benchmark Problems (2004)". The model results are compared to an analytical solution by Agarwal et al. (AIAA Vol. 42, No. 1, January 2004). A point source is located in a narrow 2D jet of Mach 0.8. The model investigates the ...

Vibrations of a Disk Backed by an Air-Filled Cylinder

The vibration modes of a thin or thick circular disc are well known, and it is possible to compute the corresponding eigenfrequencies to arbitrary precision from a series solution. The same is true for the acoustic modes of an air-filled cylinder with perfectly rigid walls. A more interesting question to ask is: What happens if the cylinder is sealed in one end not by a rigid wall but by a thin ...

Jet Pipe

This example models the radiation of fan noise from the annular duct of a turbofan aeroengine. When the jet stream exits the duct, a vortex sheet appears along the extension of the duct wall due to the surrounding air moving at a lower speed. The near field on both sides of the vortex sheet is calculated. The Aeroacoustics modeling interface in the Acoustics Module describes acoustic waves in a ...

Vibrating Micromirror with Viscous and Thermal Damping

Micromirrors are used in certain MEMS devices to control optic elements. This model of a vibrating micromirror surrounded by air uses the Thermoacoustic-Shell Interaction user interface to model the fluid-solid interaction, and it thus includes the correct viscous and thermal damping of the mirror from the surrounding air. The resonance frequency of the mirror when under a torquing load is ...

Acoustic Levitator

An ultrasonic standing wave levitator, also called acoustic levitator, is a device used for levitating fluid and solid particles in an acoustic field. The standing acoustic waves exert an acoustic radiation force on the particles. The force is a second order effect and stems from a combination of the time averaged pressure and inertial interaction between the particles and the acoustic field. By ...

Acoustic Muffler with Thermoacoustic Impedance Lumping

This model utilizes the thermoacoustic interface in a submodel to obtain a detailed (and more precise) measure for the transfer impedance of a perforated plate. The impedance is in turn used as an internal impedance in a pressure acoustic model of a muffler. Results are compared to classic impedance models.

Radially Polarized Piezoelectric Transducer

This tutorial model shows how a user-defined coordinate system can be used to create any type of directional polarization of a piezoelectric material. Results are shown for the case of radial polarization of a piezoelectric disk. The piezoelectric material is PZT-5H. The example shows a static analysis. Visualization of the cylindrical coordinate system as well as the stress/strain in that system ...

Transient Gaussian Explosion

An ellipse with sound-hard walls has the interesting property that an acoustic signal emanating from one of the foci refocuses at the other focal point b/c seconds later, where b (in meters) is the major axis length and c (m/s) is the speed of sound. This model involves a Gaussian explosion at one focus of an ellipse to illustrate some properties of time-dependent acoustic problems. The ...

Quick Search