Galeria de Modelos

A Galeria de Modelos possui arquivos do COMSOL Multiphysics de várias áreas de aplicação incluindo elétrica, mecânica, escoamento e química. Você pode baixar modelos prontos e também tutoriais passo-a-passo para montar seu modelo, e usá-lo como ponto de partida para o seu próprio modelo. Use a função de busca "Quick Search" para encontrar modelos na sua área de interesse e faça o login ou o seu cadastro no COMSOL Access, cadastrando a sua licença do COMSOL, para poder baixar os arquivos.

Isolator Thickness Effect on Galvanic Corrosion Mitigation

The use of Aluminum (Al) isolator is a commonly employed mitigation strategy for galvanic corrosion between magnesium alloy (Mg) and mild steel (MS). The present model demonstrates the effect of Al isolator thickness on galvanic corrosion severity using a parametric study. The electrode kinetics is implemented here using the experimental polarization data available in literature.

Split-Recombine Mixer Benchmark

This example models a split and recombine mixer channel in which a tracer fluid is introduced and mixed by multi-lamination. Diffusion is removed from the model using an extremely low diffusion coefficient so that any numerical diffusion can be studied in the lamination interfaces. The results compare well with Glatzel et al (Ref 1.) in both the lamination patterns and total pressure drop ...

Cascaded Rectangular Cavity Filter

A cascaded cavity filter provides much better bandpass filter performance compared to a single cavity. Out-of-band rejection improves dramatically using a cascaded design. This model uses three rectangular cavity filters coupled via slots. The calculated S-parameters show excellent out-of-band rejection.

A Transport Problem

A transport problem, modeling stationary transport in one direction, with a discontinuous solution is solved to illustrate the effect of streamline diffusion. A pure stationary transport problems contains a convective term only. This means that oscillations and instabilities from the numerical method are some factors that need to be addressed. Streamline diffusion stabilizes oscillations ...

Vibrations in a Milk Container

This example illustrates a multiphysics application that involves a fluid-structure interaction. It simulates a filled milk container on a conveyor belt, which starts moving. The methodology presented here defines two problems, one for the container walls and one for the fluid. The two problems are subsequently merged into one problem using a special interface condition that imposes ...

Deformation of a Feeder Clamp

This example analyzes the deformation of a feeder clamp under stress. The clamp secures a feeder that carries high-frequency electromagnetic fields, and it’s important that it remains as straight as possible. Forces on the clamp include both those from the feeder as well as those on the sleeve arising from the clamping screw. In this analysis, the feeder clamp is attached to a wall using ...

Heating of a Flow in a Heat Exchanger Unit Cell

In this example, we study the transport by convection and conduction. Such a system may be found in a heat exchanger or in heating of endothermic reactors. The fluid flow enters the unit cell from below and the fluid is heated as it passes the heated cylinder. Since the problem is symmetric, we only need to treat half of the unit cell. We vary the flow rate, using the parametric solver, in ...

The Multiphysics Modeling of Joule Heating in an Electronic Conductor

Direct Current heats an electronic conductor, changing the conductor's properties, which are a function of temperature. As the conductivity is dependent on the temperature, the DC current is affected, which in turn affects the Joule Heating. The example couples the thermal and electronic current balances to find the stationary solution for the electronic conductor, and its temperature profile.

Eigenmodes in a Muffler

In this model, compute the propagating modes in the chamber of an automotive muffler. The geometry is a cross-section of the chamber in the Absorptive Muffler example. The model’s purpose is to study the shape of the propagating modes and to find their cut-off frequencies. As discussed in the documentation for the Absorptive Muffler, some of the modes significantly affect the damping of the ...

Leaky Well

In layered sedimentary sequences confining units often sandwich viable reservoirs. If the confining units create less than perfect seals, fluids from an overlying reservoir can leak into the pumped reservoir below it. Often the pumping from the lower reservoir does not change flow in the unpumped one above. In these cases the leakage through the imperfect confining unit can be modeled as a ...

Quick Search