Galeria de Modelos

The Model Gallery features COMSOL Multiphysics model files from a wide variety of application areas including the electrical, mechanical, fluid, and chemical disciplines. You can download ready-to-use models and step-by-step instructions for building the model, and use these as a starting point for your own modeling work. Use the Quick Search to find models relevant to your area of expertise, and login or create a COMSOL Access account that is associated with a valid COMSOL license to download the model files.

Stress-Optical Effects with Generalized Plane Strain in a Photonic Waveguide

Planar photonic waveguides in silica (SiO2) have great potential for use in wavelength routing applications. The major problem with this type of waveguide is birefringence. Anisotropic refractive indices result in fundamental mode splitting and pulse broadening. The goal is to minimize birefringence effects by adapting materials and manufacturing processes. One source of birefringence is the use ...

Bracket Tutorial Models

These models are used for an introduction to structural mechanics modeling using the structural mechanics module. The following features are introduced: - The Fundamentals: A Static Linear Analysis - Parametric study - Including Initial Strain - Modeling Thermal Expansion - Adding Rigid Connector - Adding Spring Conditions - Modeling with the Shell Physics Interface - Transient Analysis - ...

Heating Circuit

Small heating circuits find use in many applications. For example, in manufacturing processes they heat up reactive fluids. The device used consists of an electrically resistive layer deposited on a glass plate. The layer causes Joule heating when a voltage is applied to the circuit. The layer’s properties determine the amount of heat produced. This multiphysics example simulates the ...

Fluid-Structure Interaction in a Network of Blood Vessels

This model refers to a portion of the vascular system of a young child - the upper part of the aorta artery. The blood vessels are embedded in a biological tissue (the cardiac muscle) and, during the flow of blood, pressure is applied to the internal surfaces producing deformation of the vessel walls. The complete analysis consists of two distinct but coupled procedures: a fluid-dynamics ...

Cylinder Roller in Contact: A Benchmark Study

Consider an infinitely long steel cylinder resting on a flat aluminum foundation, where both structures are elastic. The cylinder is subjected to a point load along its top. The objective of this study is to find the contact pressure distribution and the length of contact between the foundation and the cylinder. An analytical solution exists, and this model includes a comparison against the ...

Piezoelectric Shear-Actuated Beam

The model performs a static analysis on a piezoelectric actuator based on the movement of a cantilever beam, using the Piezoelectric Devices predefined multiphysics interface. Inspired by work done by V. Piefort and A. Benjeddou, it models a sandwich beam using the shear mode of the piezoelectric material to deflect the tip.

Wave Propagation in Rock Under Blast Loads

Transient analysis of the wave propagation in rock mass caused by a short duration load on the surface. Such loads are typical during tunnel constructions and other excavations using blasting. The model shows the use of the Low-reflecting boundary conditions to truncate the computational domain to a reasonable size. The results are in very good agreement with those presented in the following ...

Prestressed Bolts in a Tube Connection

A tube connection consisting of a flange with four pre-stressed bolts is subjected to tensile forces. Two contact regions are modeled: one between the bottom surface of the flange and the top surface of an additional fixed solid, and the other between the washer under the bolt head and the flange. In order to compute the influence of the tensile force on the stress level in the bolt, a ...

Viscoelastic Structural Damper

Damping elements involving layers of viscoelastic materials are often used for reduction of seismic and wind induced vibrations in buildings and other tall structures. The common feature is that the frequency of the forced vibrations is low. This model studies a forced response of a typical viscoelastic damper. The analysis involves two cases: a frequency response analysis and a time-dependent ...

Contact Analysis of a Snap Hook Using a Penalty Formulation

Several numerical algorithms exist to tackle structural contact problems. The one used in COMSOL Multiphysics is based on the so-called Augmented-Lagrangian method. An alternative approach presented in this example model is called the penalty method. It is based on the penalty factor formulation related to the penetration of the solid parts in contact. In certain cases, this approach can ...

Quick Search

1 - 10 of 69 First | < Previous | Next > | Last