Artigos Técnicos e Apresentações

Aqui você encontrará apresentações realizadas nas Conferências de Usuários COMSOL de todo o mundo. As apresentações englobam pesquisas e produtos inovadores feitas por engenheiros e cientistas usando o COMSOL Multiphysics. Os tópicos abramgem uma grande gama de indústrias e aplicações, como elétrica, mecânica, escoamento e química. Use a função de busca "Quick Search" para encontrar apresentações na sua área de interesse.

Toward an Evaluation of the Tonal Colouring of the Japanese koto using COMSOL Multiphysics and Acoustics Module

K. Coaldrake[1]
[1]The University of Adelaide, Adelaide City, South Australia, Australia

This paper investigates the potential for a multidisciplinary approach using COMSOL Multiphysics for the evaluation of the tonal colouring of the Japanese koto (13-stringed zither). It uses Ando’s classic acoustic studies (1986; 1996) as a benchmark for the analysis of the natural resonant frequencies and design of the sounding body of the koto. It reports on the development of the model and ...

On the Numerical Modeling of Elastic Resonant Acoustic Scatterers

V. Romero-García[1], A. Krynkin[2], J.V. Sánchez-Pérez[1], S. Castiñeira-Ibáñez[3], and L.M. Garcia-Raffi[4]
[1]Centro de Tecnologías Físicas Acústica, Universidad Politécnica de Valencia, Valencia, Spain
[2]School of Computing, Science & Engineering, University of Salford, Salford, United Kingdom
[3]Depto. Física Aplicada, Universidad Politécnica de Valencia, Valencia, Spain
[4]Instituto Universitario de Matemática Pura y Aplicada, Universidad Politécnica de Valencia, Valencia, Spain

The elastic and geometrical properties of Low Density Polyethylene (LDPE) foam are used in this paper to improve the attenuation properties of periodic arrangements of acoustic scatterers known as Sonic Crystals (SCs). A specific recycled profile of LDPE foam is used as elastic-acoustic scatterer. The acoustic spectrum of the single scatterer shows two attenuation peaks in the low frequency ...

Analysis of Sound Propagation in Lined Ducts by Means of a Finite Element Model

D. Borelli[1] and C. Schenone[1]
[1]DIPTEM, University of Genova, Genova, Italy

The present paper describes the results of a Finite Element Model used to analyze sound propagation in lined ducts. By means of a numerical model it was possible to predict the insertion loss inside rectangular lined ducts in a frequency range from 250 Hz to 4000 Hz. The model was validated by a comparison with experimental data obtained in accordance to ISO 11691 and ISO 7235 standards. The ...

Design of Traveling Wave Ultrasonic Vibration Disk for Nano-particles in Liquid Dispersion

J. Muraoka, and T. Suzuki
Yamagata Research Institute of Technology

The traveling wave ultrasonic vibration disks for dispersion of particles were designed by using of FEM analysis. The vibration disks are required specific vibration pattern, which contains three nodal lines. The vibration disk thickness was calculated to be matched the resonance frequency of bolted langevin type transducer and the specific vibration pattern. The alignment of the transducer was ...

Towards a Finite Element Calculation of Acoustical Amplitudes in HID Lamps

B. Baumann[1], M. Wolff[1], J. Hirsch[2], P. Antonis[2], S. Bhosle[3], and R. Valdivia Barrientos[4]
[1]Hamburg University of Applied Sciences, Hamburg, Germany
[2]Philips Lighting, Eindhoven, The Netherlands
[3]LAPLACE, Université de Toulouse and CNRS, Toulouse, France
[4]National Institute of Nuclear Research, Salazar, Ocoyoacac, Mexico

High intensity discharge lamps can experience flickering and even destruction, when operated at high frequency alternating current. The cause of these problems has been identified as acoustic resonances inside the lamp’s are tube. Here, a finite element approach for the calculation of the acoustic response function is described. The developed model does not include the plasma dynamics.

Comsol’s New Thermoviscous Interface and Computationally Efficient Alternative Formulations for FEM

W. R. Kampinga[1], and Y. H. Wijnant[2]
[1]Reden, Hengelo, Netherlands
[2]University of Twente, Enschede, Netherlands

Three efficient alternatives to the model in COMSOL’s thermoacoustics interface are presented. The higher efficiency of these models are explained from theory and are demonstrated by means of two examples.

Lösung eines gekoppelten Konvektions-Diffusions-Problems aus der Akustik

G. Bärwolff
TU Berlin, Inst.f.Math., Berlin

Zur effizienten Beschreibung akustischer Systeme werden oft sogenannte Netzwerkmodelle benutzt. Hierbei wird das Gesamtsystem in einzelne (einfache) Elemente zerteilt, die dann jeweils durch ihr eigenes Übertragungsverhalten charakterisiert sind. Besonders einfach lässt sich dieses Übertragungsverhalten darstellen, wenn zwischen den Elementen nur ebene Wellen ausbreitungsfähig sind.1 In ...

Eigenmodes of Photoacoustic T-cells

Baumann, B.1, Kost, B.1, Groninga, H.2, Wolff, M.1, 2
1 University of Applied Sciences Hamburg, Mechanical and Production Engineering
2 PAS-Tech GmbH, Zarrentin

The photoacoustic effect is based on resonant absorption of light by a sample and the transfer of the excitation energy into thermal energy via inelastic collisions of gas molecules. A modulated irradiation of the sample causes periodic pressure variations that can be detected by a microphone and measured using lock-in technique. Photoacoustic spectroscopy finds many applications in the field of ...

Can the Drumhead be Decomposed from Spectra? - An Application for the Chesapeake Bay

K. McIlhany[1], and R. Malek-Madani[2]
[1]Physics Department, United States Naval Academy, Annapolis, MD, USA
[2]Mathematics Department, United States Naval Academy, Annapolis, MD, USA

In 1966, mathematician Mark Kac proposed the question "Can One Hear the Shape of a Drum?" in an article for American Mathematical Monthly. In attempting to resolve the Chesapeake Bay from an eigenfunctional approach, a one-to-one mapping of this famous problem has been identified. The quote above will re-write to "Can One Hear the Shape of a Drum from Multiple Point-Sampled Spectra?". This ...

Linear Water Wave Propagation around Structures

L. Martinelli, and A. Lamberti
Universita di Bologna, Italy

Objective of this contribution is to show how to implement the Mild Slope Equations with COMSOL Multiphysics. These equations are commonly used to study the propagation of waves in harbors. Some interesting features are presented, namely the use of weak terms (used for the modelling of the source term); the evaluation of a smooth phase gradient from the complex dependent variable; a robust ...

Quick Search