Harbin Institute of Technology, Harbin, China
In this presentation, “Design and Analysis of MEMS-based direct methanol fuel cell,” there are three main model parts, two-dimensional two-phase mass transport model, μdmfc three-dimensional model and a novel cathode model. First, a two-dimensional two-phase mass transport model was established. In this model, the process of gas-liquid transfer and electrochemical reaction within the ...
G. Zhu, and Y. Li
Lawrence Technological University, Southfield, MI, USA
Fluids used in biomedical microelectromechanical systems (BioMEMS) devices often exhibit very different flow behavior from those in bulk solutions, which in turn affects the behavior of cells and biomolecules in the device. In this work, we investigate an integrated microfluidic system for living cell culture and assay. The system can be used as a generic platform to study the behavior of ...
Pryor Knowledge Systems, Inc.
COMSOL, Certified Partner
Efficient, effective, and functional operation of autonomous systems requires a comprehensive real-time understanding, by those systems, of the embedding environment. This paper presents a brief overview of the multiphysics considerations involved in the development of models for thermoresistive and magnetoresistive sensors systems.
T. Klose, H. Conrad, T. Sandner, and H. Schenk
Fraunhofer Institute Photonic Microsystems (FhG-IPMS), Germany
TU Dresden, Semiconductor and Microsystems Technology Laboratory, Germany
Damping is the liminting factor for the reachable maximum deflection. Thus, it is a very important issue for resonant microsystems. In this paper, we present a damping model for out-of-plane comb driven resonant micromirrors. The basic concept of this model is to attribute viscous damping in the comb gaps as the dominant contributor of damping moments. The model is extended by findings from a ...
B. Ottosson, Y. Jouahri, C. Rusu, and P. Enoksson
Imego AB, Gothenburg, Sweden
Chalmers University of Technology, Gothenburg, Sweden
The objective of this work has been to realize a feasibility study of a cooling device for a SQUID sensor using liquid nitrogen flowing through micro channels. The design consists of an epoxy cylindrical vacuum vessel skewed by a silicon microchannel heat sink. The SQUID sensor is situated directly on top of the microchannel heat sink. The device is used at room temperature and should be able to ...
S. Druart, D. Flandre, and L.A. Francis
Université catholique de Louvain - ICTEAM, Louvain-la-Neuve, Belgium
In this paper, a methodology to simulate the electric behavior of spiral inductances is presented and discussed. All the methodology is built with the COMSOL software used with the Matlab scripting interface and then allows performing fully parameterized simulations. The program architecture is explained and is used to simulate two applications. The first calculates the voltage induced by an ...
N.N. Sharma, and A. Tekawade
Mechanical Engineering Group, Birla Institute of Technology & Science, Pilani, Rajasthan, India
A simple design for a microfluidic flow system for use in mixing or reacting assays with limited sample availability has been proposed and analyzed using COMSOL\'s multiphysics simulation package. The design is based on differential electroosmotic flow concept which has facilitated a number of interesting flow phenomena in micro-domains. For an average potential drop of about 86 kV/m in the ...
Narovlyansky, M.1, Squires, T.M.2, Whitesides, G.M.1
1 Department of Chemistry and Chemical Biology, Harvard University, Cambridge, MA, U.S.A.
2 Departments of Physics and Applied Mathematics, Caltech, Pasadena, CA
In electrokinetic separations, the narrower and more homogeneous the initial sample plug, the higher the ultimate resolution of the separation. Here we describe a general and versatile method to sculpt low-dispersion, high-fidelity sample zones in microfluidic devices for high resolution electrokinetic separations. In a simple channel intersections microfabricated partitions act to reduce each ...
J. J. Ruz Martinez
Instituto de Microelectronica de Madrid
The motion of a resonant NEMS has been widely studied for many different applications such as structural mechanics in engineering, ultra sensitive mass spectrometers or the well known Atomic Force Microscope. The study of the eigenfrequencies of such structures is very important, and nowadays there are good theoretical methods to accurately predict such eigenfrequencies. When a little mass is ...
A. K. Namdeo, N. Ramakrishna, H. B. Nemade[1,2], and R. P. Palathinkal
 Department of Electronics and Communication Engineering, Indian Institute of Technology Guwahati, Assam, India
 Centre for Nanotechnology. Indian Institute of Technology Guwahati, Assam, India
In this paper a finite element method(FEM) study of a surface acoustic wave (SAW)device excited by electrostatic coupling method is performed by using COMSOL Multiphysics. We have modeled a Rayleigh wave type SAW device by choosing YZ Lithium niobate as the substrate. The effect of external radio frequency (RF) field to the SAW device is analyzed. The effect of distance between the contactless ...